AirSep Onyx PSA Oxygen Generator - NEW UNIT
Here's what you get!
AirSep Onyx Oxygen Generator
Free tech support for one year!
Ships within 3-4 business days of ordering (M-F)
Shipping: $39 within the contiguous 48 states. Contact us for orders outside USA.
Why Exercise with an Oxygen Generator?
EWOT (exercise with oxygen therapy) is making its way into clubs, gyms, and training studios around the world. The benefits of breathing 92% oxygen during exercise is profound. There is no other way to maximize the gains of exercise than with a higher concentration of O2.
Slow the aging process and add years to your life!
Increase your strength during exercise and burn more calories
Increase blood oxygen and improve your well-being
Decrease risk of disease
Increase your energy
Click to Learn about EWOT
• Produces oxygen from compressed air
• Microprocessor controlled
• Low operating cost
• Easy to install and maintain
The Pressure Swing Adsorption (PSA) Oxygen Generating Process
Air contains 21% oxygen, 78% nitrogen, 0.9% argon, and 0.1% other gases. AirSep Oxygen Generating Systems separate oxygen from compressed air through a unique Pressure Swing Adsorption (PSA) process. The PSA process uses molecular sieve (a synthetic zeolite), which attracts (adsorbs) nitrogen from air at high pressure and releases (desorbs) it at low pressure. AirSep Oxygen Generators use two vessels filled with molecular sieve as adsorbers. As compressed feed air flows through one of the vessels, the molecular sieve adsorbs nitrogen. The remaining oxygen passes through the vessel and exits as the product gas. Before the adsorber becomes saturated with nitrogen, the feed air is diverted to the second vessel. At that point, the sieve in the first vessel regenerates by desorbing the nitrogen through depressurization and purging it with oxygen from the second vessel. This process is then repeated in the second vessel to complete a cycle that allows the oxygen generator to deliver a constant flow of product oxygen at 90% minimum purity. Under normal operating conditions, the molecular sieve is completely regenerative and will last indefinitely.
Specifications of Onyx PSA Oxygen Generator
Size: 15" x 15" x 28" (LxWxH) 55 lbs.
Product Flow: 10-12 SCFH (standard cubic feet per hour)
LPM: 6 LPM at 9 PSIG (pounds per square inch gauge) at 90-95% purity.
Standard Product Pressure: 1–9 psig
Product Purity: 93% Nominal
Product Dew Point: -100°F (-73°C)
Ambient Operating Conditions
Locate the oxygen generator in a well-ventilated area that
is protected from weather elements and remains between
40°F (4°C) and 112°F (44°C)
Control Power Requirements
120 V ~ ±10%, 50/60 Hz, Single Phase, 4.0 A
220 V ~ ±10%, 50/60 Hz, Single Phase, 2.0 A
Typical Power Consumption (at 93% purity): 350 W
Compressed Air Inlet: 1/4” NPT
Product Gas Outlet: 1/4” NPT/B size oxygen adapter
Certifications and Approvals
NRTL certified compliance to UL3101.1, CSA, CE
Warranty: 1 Year Parts and Factory Labor*
AirSep Onyx Oxygen Generator