AirSep Onyx Oxygen Generator 6 LPM Factory Refurbished

AirSep Onyx Oxygen Generator - Factory Refurbished

NO PRESCRIPTION REQUIRED!

NO OXYGEN TANKS TO REPLACE!

AirSep Onyx Oxygen Generator Used Factory Refurbished

Access to Dr. Wenborg. Ask him any oxygen related questions!

Free tech support for one year!

Ships within 24 hours of ordering (M-F) IN STOCK.

Why Exercise with an Oxygen Generator?
EWOT (exercise with oxygen therapy) is making its way into clubs, gyms, and training studios around the world. The benefits of breathing 92% oxygen during exercise is profound. There is no other way to maximize the gains of exercise than with a higher concentration of O2.

Click to Learn about EWOT

Features of Airsep Onyx Oxgen Generator

• Produces oxygen from compressed air

• Microprocessor controlled

• Low operating cost

• Easy to install and maintain

The Pressure Swing Adsorption (PSA) Oxygen Generating Process

Air contains 21% oxygen, 78% nitrogen, 0.9% argon, and 0.1% other gases. AirSep Oxygen Generating Systems separate oxygen from compressed air through a unique Pressure Swing Adsorption (PSA) process. The PSA process uses molecular sieve (a synthetic zeolite), which attracts (adsorbs) nitrogen from air at high pressure and releases (desorbs) it at low pressure. AirSep Oxygen Generators use two vessels filled with molecular sieve as adsorbers. As compressed feed air flows through one of the vessels, the molecular sieve adsorbs nitrogen. The remaining oxygen passes through the vessel and exits as the product gas. Before the adsorber becomes saturated with nitrogen, the feed air is diverted to the second vessel. At that point, the sieve in the first vessel regenerates by desorbing the nitrogen through depressurization and purging it with oxygen from the second vessel. This process is then repeated in the second vessel to complete a cycle that allows the oxygen generator to deliver a constant flow of product oxygen at 90% minimum purity. Under normal operating conditions, the molecular sieve is completely regenerative and will last indefinitely.

Specifications of AirSep Onyx Oxygen Generator

Product Characteristics

Size: 15" x 15" x 28" (LxWxH) 55 lbs.

Product Flow: 10-12 SCFH (standard cubic feet per hour)

LPM: 6 LPM at 9 PSIG (pounds per square inch gauge) at 90-95% purity. Heard that 6LPM is not enough for EWOT? Click here for Dr. Wenborg's answer to this question:

Standard Product Pressure: 1–9 psig

Product Purity: 93% Nominal

Product Dew Point: -100°F (-73°C)

Ambient Operating Conditions

Locate the oxygen generator in a well-ventilated area that

is protected from weather elements and remains between

40°F (4°C) and 112°F (44°C)

Control Power Requirements

120 V ~ ±10%, 50/60 Hz, Single Phase, 4.0 A

220 V ~ ±10%, 50/60 Hz, Single Phase, 2.0 A

Typical Power Consumption (at 93% purity): 350 W

Physical Connections

Compressed Air Inlet: 1/4” NPT

Product Gas Outlet: 1/4” NPT/B size oxygen adapter

Certifications and Approvals

NRTL certified compliance to UL3101.1, CSA, CE

Warranty: 1 Year Parts and Factory Labor*

AirSep Onyx Oxygen Generator REVIEW:
The onyx is a very quiet unit. Slightly heavy, but expected for a commercial system. Simply remove from box, plug into any standard wall outlet (120v), turn on, set floating ball so the center of the ball is at 50, let run for 5 minutes and begin. Item has rollers so it's easy to move around. There is a button on the front which you can depress should it shut down while in operation. This is the circuit trip switch. Front panel has a use indicator which shows hours of use since refurbish date. Includes tubing adaptor and two new rear pre-filters. Clean with warm water and let air dry.

---

You may also be interested in this/these product(s)

Salter-Style 1600Q Cannula oxygen delivery tube-50 pack $48.00

Oxy Sport Headset Exercise Oxygen Cannula Head Set $49.00